Energy Bill Savings

Energy Bill saving

Heating and Air-Condition

Heating and air conditioning are the most important energy consumers in the typical household. Much of the heat and cool air escapes because of poorly insulated roofs, walls, doors, and windows. In fact in a lot of cases heating and cooling is responsible for around 50% of your energy costs. Improving insulation will result in greater conservation of energy and lesser energy costs. Small changes in this area can result in dramatic reduction in your monthly payment to your utility company.
Old cooling and heating appliances should be replaced with newer models which are more energy efficient. Other large appliances like refrigerators can also be replaced with newer models that are designed to conserve energy. Always make sure you read the energy label, if you do, you will often find that a cheap product in fact can be expensive in its every day use because of its energy consumption.


The lights in an average household use about 20% of the total electricity, so anything that will reduce that power consumption will help lower your energy bill while cutting down on pollution. Fortunately, it's easy to save energy on lighting by simply installing energy saving light bulbs.
Traditional light bulbs are inefficient because much of the energy they consume is converted to heat. Replacing all your incandescent bulbs with compact florescent bulbs will provide the same level at light with less energy consumption. Even though the cost of these bulbs is greater than traditional bulbs, they last up to 20 times longer, resulting in significant overall savings.
1. Use dimmers on all your bulbs, and only keep lights as bright as needed for your work. Instead of turning on big watt-sucking overhead lights, use task lighting when appropriate.

2. Use timers and motion- or heat-sensing lights outdoors.

3. Make the most of the natural light from outside. Consider skylights and well-placed mirrors, which can reflect more light into a room, thus reducing energy costs.


• Leave at least one inch between the wall and the back of the refrigerator. This will help air to circulate, control the temperature and avoid over-heating.
• Radiators, heat ducts, vents, stoves, and even sunlight can cause your refrigerator to use more power than necessary so try not to place your refrigerator adjacent to any of these heat sources.
• Check the temperature of your fridge and freezer regularly. The temperature of the fridge should be between 35 and 38 degrees and your freezer at 0 degrees for optimal performance.

WWW.BOLTWIRE.COMKontakt und Impressum
--This page was generated on 05/26/17 05:40:53. Copyright © 2009, all rights reserved.--